2 Pages :

Your search + Self-levelling compounds 14 products | 24 distributors | 10 FAQ | 25 Definitions found
Self-levelling compounds
Substrate preparation/Primers
(1)
Bostik
(5)
Roxol
(9)
Sader
(1)
Floors
(12)
Exterior
(2)
Ready-to-use
(1)
Ceramic tiles
(11)
Construction
(13)
It can be applied in layers between 1-20 mm thickness in one work step. Thick layers and sloping finish possible by adding 0.4-0.9 mm sharp sand (i.e. in collective showers and kitchen). Quick hydraulic setting.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Red-coloured to provide visual quality control. High resistance to indentation- Up to 10 mm in one work step. Reduced sanding.
Specially designed for renovation works in occupied locations. Dry for floor coverings after only 2-4 hours. Good mechanical and application qualities. Final finish in one step - no need to sand.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Flexible levelling compound for smoothing and levelling of subfloors. It can be applied in layers between 3-10 mm thickness in one work step. Excellent mechanical properties. Self-levelling: little or no sanding required. Does not shrink, recommended on difficult surfaces.
Self-smoothing compound suitable for hard/heavy wear. It can be applied in layers between 1-30 mm thickness (3-30 mm for heavy-duty area) in one work step. Good mechanical properties. Rapid hydraulic setting.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Applied in layers between 0.5 and 2 mm thickness. Can be used to fill pin holes in cement screeds. Excellent resistance to puncture and abrasion. Mechanical performance suitable for heavy wear locations. Can be used on vertical surfaces such as stair risers.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 50 mm in single work step. Can be used for smoothing walls up to 5 mm thickness. Can be used for local repairs at thickness greater than 30 mm, e.g. filling holes, depressions and cracks; repairing stairs and landings, building up sloping surfaces.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 5 mm in a single work step. Suitable for normal wear (plastic and textile coverings) in domestic/residential and light commercial locations. Does not shrink, very tolerant in renovation works.
Red-coloured to provide visual quality control. Suitable for smoothing and levelling of screeds, concrete floors and other hard, rigid bases, up to a maximum thickness of 15 mm in a single work step. Paintable. High resistance to puncture. Excellent bonding strength. Little or no sanding required.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
It is suitable for modifying our smoothing compounds for moderate wear into hard wear compounds. 1 kg pouch is sufficient for 25 kg of compound. It changes the modulus of elasticity of smoothing underlayments and makes their use safer in difficult working conditions. Red-coloured to provide visual control of its mixing into the compound prior to application to heavy-duty locations.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
2 Pages :
