Your search + Ceramic tiles 31 products | 24 distributors | 10 FAQ | 25 Definitions found
Grab adhesives
(3)
Home decoration
(3)
Industrial seamless floors
(2)
Sealants
(3)
Self-levelling compounds
(11)
Substrate preparation/Primers
(5)
Tiling
(9)
Waterproofing coatings
(2)
Ardal
(9)
Bostik
(9)
Eponal
(4)
Roxol
(10)
Floors
(26)
Walls
(9)
Exterior
(6)
Ready-to-use
(7)
Suitable on wet substrate
(1)
Water resistant
(2)
Ceramic tiles
PVC
(5)
It can be applied in layers between 1-20 mm thickness in one work step. Thick layers and sloping finish possible by adding 0.4-0.9 mm sharp sand (i.e. in collective showers and kitchen). Quick hydraulic setting.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Red-coloured to provide visual quality control. High resistance to indentation- Up to 10 mm in one work step. Reduced sanding.
Specially designed for renovation works in occupied locations. Dry for floor coverings after only 2-4 hours. Good mechanical and application qualities. Final finish in one step - no need to sand.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Flexible levelling compound for smoothing and levelling of subfloors. It can be applied in layers between 3-10 mm thickness in one work step. Excellent mechanical properties. Self-levelling: little or no sanding required. Does not shrink, recommended on difficult surfaces.
Self-smoothing compound suitable for hard/heavy wear. It can be applied in layers between 1-30 mm thickness (3-30 mm for heavy-duty area) in one work step. Good mechanical properties. Rapid hydraulic setting.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 50 mm in single work step. Can be used for smoothing walls up to 5 mm thickness. Can be used for local repairs at thickness greater than 30 mm, e.g. filling holes, depressions and cracks; repairing stairs and landings, building up sloping surfaces.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 5 mm in a single work step. Suitable for normal wear (plastic and textile coverings) in domestic/residential and light commercial locations. Does not shrink, very tolerant in renovation works.
Red-coloured to provide visual quality control. Suitable for smoothing and levelling of screeds, concrete floors and other hard, rigid bases, up to a maximum thickness of 15 mm in a single work step. Paintable. High resistance to puncture. Excellent bonding strength. Little or no sanding required.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
2-component primer for the preparation of wooden floorboards and parquet, moisture resistant particleboards and plywood prior to the application of one of our levelling compounds reinforced with synthetic fibres. Multi-purpose primer: filler/repair and strengthener for joins and wooden floor defects, thus strengthening the floor and reducing cracking; primer for parquet to provide excellent adherence; damp protective primer for wood basement against water contained in self-levelling compounds.
MSDS Powder Part MSDS Resin Part 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Suitable for treatment of most substrates. Also suitable as a protective primer and bonding agent on moisture sensitive surfaces e.g. particleboard and anhydrite screed. Solvent-free. Quick drying. Acts as a bonding agent on impervious surfaces. Odourless: can be used in all locations.
MSDS Part A MSDS Part B 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
