New Search > Wood working
2 Pages :
15 products
Home decoration
(1)
Parquet
(1)
Wood working
Floors
(1)
Environmentally friendly
(2)
Heat resistant
(4)
Ready-to-use
(2)
Paper/cardboard
(12)
Construction
(4)
Consumer
(1)
Industry
(13)
Heat resistant. Gel formulation: does not flow. Long open time
Hot melt adhesive for edgebanding and soft forming applications. ARDAL HM 195 is a translucent unfilled adhesive suitable on all types of edges: wood, melamine paper, plastic materials (ABS, PVC, polyester, etc.), unprimed HPL.
Coating speed for straight edgebanding: from 30 to 60 m/min
Coating speed for soft forming: from 5 to 30 m/min
Heat resistance: 60-80°C
Suitable on allmost all types of edges: wood, melamine paper, plastic (ABS, PVC, polyester, etc.). Suitable for thick wood (up to 3cm) and difficult edges. Coating speed for straight edgebanding: from 30 to 80 m/min. Coating speed for soft forming: from 25 to 30 m/min. Heat resistance: 70-100°C.
Low application temperature. Especially designed for edgebanding application of primed PVC edges, which are not electrically conductive. Suitable on slow speed machines: from 5 to 25 m/min. Heat resistance: 60-70°C.
Very high temperature resistance: 100-130°C (ideal for kitchen furniture). Suitable for all types of edges. Suitable on slow speed machines for soft forming: from 5 to 30 m/min. Coating speed for straight edgebanding: from 5 to 80 m/min.
Filled hot melt adhesive for edgebanding application of polyester, melamine paper and wood veneer onto particle boards and plywood. Coating speed: 20-80 m/min. Good thermal stability and good heat resistance: 80-100°C.
Hot-melt adhesive for edgebanding application of polyester, melamine paper, PVC, ABS and wood veneer on particle boards or plywood. Suitable for coating speed from 20 to 80 m/min. Good heat resistance: 70-80°C. Suitable for IMA, Homag, Holz Her, Biesse, Stephani coating machines.
Hot melt adhesive for edgebanding and soft forming application of polyester, melamine paper, wood veneer on particle boards and plywood. Suitable on IMA, Homag, Holz Her, Biesse, Stephani machines. Coating speed: 15-80 m/min. High heat resistance: 70-100°C
Ideal for bonding thin straight plastic and paper edges on particle boards. Good initial cohesion. Very good thermal stability. No stringing. Good heat resistance. Suitable on speed machines from 20 to 80 m/min.
Hot melt adhesive for edgebanding and soft forming applications, designed for bonding all types of materials up to 5 mm thickness. Suitable on speed machines: from 30 to 80 m/min. Suitable for softforming application at high speed: > 120 m/min. Good thermal stability and high heat resistance: 70-90°C.
2 Pages :