Search filter

Applications: Home decoration (8); Parquet (12); Self-levelling compounds (9); Substrate preparation/Primers (3); Waterproofing coatings (2); Wood working (1)
Brands: Ardal (2); Bostik (10); Eponal (2); Roxol (8); Tarbicol (4)
Destinations: Floors (23)
Specific characteristics: Environmentally friendly (1); Exterior (2); Heat resistant (1); Ready-to-use (14); Water resistant (3)
Substrates: Ceramic tiles (9)
Segments: ~~Construction~~ (26); Consumer (2)

TLH 4280E

Hot melt pressure sensitive adhesive for general purpose permanent LABELS and TAPES

Additional Downloads
MSDS
7. Tapes & Labels (97 Kb)
Definitions
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling
TackAdhesive power to maintain together 2 materials. Tacky surface means sticky surface.

Uses

TLH 4280E is a hot melt pressure sensitive adhesive for general purpose permanent labels and tapes.

Suitable for most common face stock materials like vellum, cast-coated glossy paper, thermal paper or other design for general purpose permanent labels and tapes.

Suitable for general purpose permanent applications on paper and polyolefin.

Benefits

Very high grab product
Excellent converting properties and die-cut ability
Complies with FDA Agreement: 175 105 (indirect or direct occasional food contact)

Properties

Physical:

Colour (Gardner index)	pale yellow - 4
Viscosity Thermosel at 163°C (spindle 27, 10 rpm)	12 000 mPas (±3 000)
Softening point (Ring and Ball)	95°C (±5°)

Technical performances (20gsm on PET 50µm)

Peel adhesion at 180°

(FTM 1 – PP – 20min)

(FTM 1 – HDPE – 20min)

> 15 N/inch
> 12 N/inch

Loop-Tack

(FTM 9 – Glass)

> 25 N/inch

SAFT (Glass)

75°C

Release system compatibility:

Solvent-based Silicone => Compatible
Solventless Silicone => Compatible
UV-curable Silicone => Compatible

Recommendation: compatibility needs to be checked with your release system

Consumption:

Average coating weight: 20-22gsm (coating weight depends on type of substrate)

Shelf life:

Up to 1 year stored in its original packaging in a clean and dry place at a temperature not exceeding +35°C.

Application

TLH 4280E can be applied by roll coater or slot die nozzle at temperatures between 150 - 170°C.
Rotating slot die nozzle is recommended for low coating weight (15 to 30gsm).

Clean-up
Purge with the adhesive itself.

Packaging

Presentation	Bar code	Bostik code
carton box (free pack) - 12 kg		067887
cardboard drum - 165 kg		067881

Peel adhesion at 180° (FTM 1 – PP – 20min) (FTM 1 – HDPE – 20min)	> 15 N/inch > 12 N/inch
Loop-Tack (FTM 9 – Glass)	> 25 N/inch
SAFT (Glass)	75°C