Search filter

Applications: Assembly and repair (5); Grab adhesives (5); Heating, Ventilation & Air Conditioning (13); Home decoration (35); Industrial Assembly (5); Industrial seamless floors (10); Insulating Glass (4); Labelling (15); Parquet (12); PVC welding (4); Rigid packaging (30); Sealants (7); Self-levelling compounds (14); Soft floor (carpet /PVC) (20); Substrate preparation/Primers (13); Tapes and Labels (12); Tiling (10); Wall adhesives (9); Waterproofing coatings (9); Wood working (15)
Brands: Ardal (14); Bostik (137); Eponal (14); Laybond (2); Novaflex (4); Quelyd (17); Roxol (10); Sader (13); Tarbicol (4)
Destinations: Floors (72); Walls (21)
Specific characteristics: Environmentally friendly (47); Exterior (21); Heat resistant (7); Ready-to-use (91); Suitable on wet substrate (7); Water resistant (18)
Substrates: Ceramic tiles (31); Paper/cardboard (66); PVC (25)
Segments: Construction (105); Consumer (17); Industry (95)

New Search

Print version | Download TDS

TLH 2970E

LABELS - Hot melt pressure sensitive adhesive for clear filmic label applications

Additional Downloads
7. Tapes & Labels (97 Kb)
MSDS (34 Kb)
Definitions
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling
TackAdhesive power to maintain together 2 materials. Tacky surface means sticky surface.

Uses

TLH 2970E is a hot melt pressure sensitive adhesive for clear filmic label applications.

Used in combination with filmic material like PET, OPP or PE films or laminates design for clear labels.

CAUTIONS: For OPP or PE film construction, wettability needs to be checked: film surface tension must be > 42mJ/m² before adhesive application.

Benefits

Complete transparency after 24hrs on glass bottles with PET release liner constructions
Pass sterilisation test at 120°C for 30min

Properties

Physical:

Colour	Pale yellow (in 500g blocks), colourless once applied
Viscosity Thermosel at 177°C (spindle 27, 10 rpm)	20 000 mPas (±5 000)
Softening point (Ring and Ball)	72°C (±5°)

Technical performances (20gsm on OPP 50µm)

Peel adhesion at 180° (FTM 1 – Glass – 1 hour)	15 N/inch
Loop-Tack (FTM 9 – Glass)	20 N/inch

Release system compatibility :

Solvent-based Silicone => Compatible
Solventless Silicone => Compatible
UV-curable Silicone => Compatible

Recommendation: compatibility needs to be checked with your release system

Consumption:

Average coating weight: 20-22gsm (coating weight depends on type of substrate)

Shelf life:

Up to 1 year stored in its original packaging in a clean and dry place at a temperature not exceeding +35°C.

Application

TLH 2970E can be applied by roll coater or slot die nozzle at temperatures between 150-170°C.

Rotating slot die nozzle is recommended for low coating weight (15-30gsm).

Clean up
Purge with the adhesive itself.

Packaging

Presentation	Bar code	Bostik code
silicone box - 7 kg		061951