New Search > Tiling
Page :
10 products
Tiling
Waterproofing coatings
(1)
Ardal
(9)
Bostik
(1)
Floors
(9)
Walls
(9)
Exterior
(1)
Water resistant
(1)
Ceramic tiles
(9)
Cementitious tiling adhesive C1 TE suitable for interior walls and floors small and large-format ceramic tiles (formats up to 2,000 cm², i.e. 44×44 cm). C1- TE Classification (long open time and good non-slip properties). Suitable for private basins and swimming pools.
Cementitious tiling adhesive C1T for interior walls and floors. Suitable for small and large format ceramic tiles (formats up to 2,000 cm², i.e. 44x44 cm). Suitable for standard porosity tiles.
Cementitious tiling adhesive C2G for interior/exterior floors (tile format up to 3600cm²). Allows application of low porosity tiles on new and old subfloors. Suitable for installing tiles on difficult subfloors: floors with underfloor heating system, old tiles, premises subject to heavy traffic and loads (U4P4-U4P4S classification). High yield on new and old subfloors without primer
Cementitious flexible tiling adhesive C2TE for interior/exterior walls and floors. For large-format tiles and natural stones (lime stone, marble, granite) of all porosity. Versatile: terraces, façades, heavy traffic, collective basins and swimming pools, wood substrates, etc.
Improved cementitous tiling adhesive C2 T for interior/exterior walls and floors. Suitable for low porosity ceramic tiles (group B1a), up to 3600cm² (60×60), for new works and renovation, private basins and swimming pools. Can be used on Intermediate floor slabs, floor with underfloor heating system, anhydrite screed. Available in grey and white coulours.
Flexible joint wall and floor grout for interior and exterior use. Suitable for 2 to 20 mm wide joints. Suitable for grouting joints between marble, natural stone, terracotta, glass mosaics and vitrified tiles. Specially designed to resist to substrate deformations: façades, terraces, underfloor heating, wood flooring, commercial premises, etc. Water-repellent formulation with "pearl effect" technology that limits water and dirt penetration into joints.
Fine grout for wall and floor tiles, interior and exterior use. For grouting 1-6mm wide joints between marble, natural stone, terracotta, glass mosaics and vitrified tiles. Water-repellent formulation with "pearl effect" technology that limits water and dirt penetration into joints.
Wide joint grout for wall and floor tiles, interior and exterior use. Suitable for 2 to 20 mm wide joints. Suitable for grouting joints between marble, natural stone, terracotta, glass mosaics and vitrified tiles. Specially adapted to natural stones, terracotta and for premises subject to high pressure cleaning (up to 80 bars).
MSDS (anthracite colour) (33 Ko) MSDS (grey colour) (33 Ko) MSDS (grey-stainless steel colour) (32 Ko)
Two-part epoxy grouting compound and adhesive. For use on interior/exterior floors and walls. Suitable for joints from 2 to 15mm (ceramic tiles, mosaics, natural stone, marble, terracotta tiles). High chemical resistance and mechanical strength. Fixing and grouting mosaics in swimming pools on concrete and cement substrates. Can be used to fix tiles to specific substrates (metal, polyester).
Tiling adhesive suitable for fixing small and large format ceramic tiles on interior floors (up to 2,000 cm², i.e. 44x44 cm) and walls (20×30, i.e. 600cm²). Suitable for tiles with porosity more than 0.5%. Suitable for ceramic tiles, vitrified tiles and terracotta tiles (10×10cm).
Page :