Search filter

Applications: Home decoration (20); Industrial seamless floors (8); Parquet (12); Self-levelling compounds (12); Soft floor (carpet /PVC) (18); Substrate preparation/Primers (11); Tiling (9); Waterproofing coatings (4); Wood working (1)
Brands: Ardal (14); Bostik (22); Eponal (9); Laybond (1); Novaflex (2); Quelyd (1); Roxol (10); Sader (12); Tarbicol (4)
Destinations: Floors; Walls (11)
Specific characteristics: Environmentally friendly (1); Exterior (8); Heat resistant (2); Ready-to-use (37); Suitable on wet substrate (2); Water resistant (5)
Substrates: Ceramic tiles (26); PVC (14)
Segments: Construction (69); Consumer (3)

TEF 266 M

Freezer grade hot melt adhesive for case sealing applications. Yellow colour

Additional Downloads
MSDS
7. Carton sealing and closing (154 Kb)
Definitions
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling
ImperviousCharacterisitc of a subfloor which porosity is very low. Adhesion on such substrates is usually more difficult and requires more attention and preparation.
Open timeTime between the moment the adhesive was applied and the moment it has no more tack (end of possible laying the covering)

Uses

TEF 266 M is a 100% hot melt freezer grade packaging adhesive for sealing cases and boxes, bonding straws to PE bricks. Suitable for standard and non absorbent cardboard. Suitable for high-speed packaging lines.

Benefits

Very good wetting properties on standard and non absorbent cardboard
All ingredients are approved under the Federal regulation 175 105 & BGA (for incidental contact of adhesives with food)
Good freezer resistance
Good resistance to low positive temperatures
Fast setting time
Suitable for all applications by nozzle (Nordson, Valco, Robatech, etc.)
Suitable for application by wheel (never exceed 180°C)

Properties

Physical:

Aspect: pellets
Colour: yellow
Thermosel Viscosity– spindle 21, 20 rpm at 170°C: 1000 – 1600 mPas
Softening point, Ring & Ball: approx. 102-112°C
Open time*: 1 to 2 s
Setting time*: approx. 1 to 5 seconds

* Open and setting times are tested according to Bostik internal method. Open and setting times may vary depending on:

ambient temperature, temperature of the substrate, adhesive application temperature
coverage
nature and porosity of the substrate

Shelf life:

2 years in original unopened packaging, stored at ambient temperature. Keep away from humidity.

Application

Application temperature: 160–180°C.
Application by nozzle or wheel (never exceed 180°C).

Packaging

Presentation	Bar code	Bostik code
bag - 25 kg		068841