New Search
Assembly and repair
(5)
Grab adhesives
(5)
Heating, Ventilation & Air Conditioning
(13)
Home decoration
(35)
Industrial Assembly
(5)
Industrial seamless floors
(10)
Insulating Glass
(4)
Labelling
(15)
Parquet
(12)
PVC welding
(4)
Rigid packaging
(30)
Sealants
(7)
Self-levelling compounds
(14)
Soft floor (carpet /PVC)
(20)
Substrate preparation/Primers
(13)
Tapes and Labels
(12)
Tiling
(10)
Wall adhesives
(9)
Waterproofing coatings
(9)
Wood working
(15)
Ardal
(14)
Bostik
(137)
Eponal
(14)
Laybond
(2)
Novaflex
(4)
Quelyd
(17)
Roxol
(10)
Sader
(13)
Tarbicol
(4)
Floors
(72)
Walls
(21)
Environmentally friendly
(47)
Exterior
(21)
Heat resistant
(7)
Ready-to-use
(91)
Suitable on wet substrate
(7)
Water resistant
(18)
Ceramic tiles
(31)
Paper/cardboard
(66)
PVC
(25)
Construction
(105)
Consumer
(17)
Industry
(95)
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for low speed (< to 30 000 bottles/hour). Good flow characteristics.
Labelling glue suitable for fast speed machines up to 60 000 bottles / hour. Labelling of paper labels on cold, wet, dry and hot, commercially available glass bottles.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for high speed (up to 80 000 bottles/hour). Good flow characteristics. Good resistance to water condensation.
Versatile use up to 30 000 bottles / hour and especially for warm / hot labelling conditions. Labelling of paper labels on glass; warm, hot, cold, wet, dry conditions.
Labelling of paper labels on glass bottles. Cold, warm, wet or dry conditions. Very high green tack characteristic preventing slipping of paper labels. Suitable for high speed (up to 60 000 bottles / hour).
BLU TACK is the original re-usable adhesive that provides an ideal alternative to drawing pins and sticky tapes with hundred of uses around home, office and school environment. Suitable for: holding up posters, cards, paintings; holding down telephones, photographs in albums, calculator, wires; cleaning fluffs from fabric and dirt from keyboards.
High bond-strength for hanging all borders over any wallcovering, wallpaper and substrate. Easy Slide for quick border adjustability. Economic coverage. Extremely high tack: easy bonding and border positioning. Contains antifungal and biocide additives to prevent mould growth. Ideal for hanging in areas subject to condensation or wet areas (kitchen, bathroom). Packaging available in 4 languages: Romanian, Bulgarian, Ukranian, Russian.
Specifically formulated for use in the production of dual seal insulating glass units. Exhibits an extremely low moisture vapour transmission rate and excellent adhesion to glass, aluminium and galvanised steel spacer bar. Acts as a thermal break. Can also be used as a Spacer bar adhesive.
Single part butyl rubber based sealant. Compatible with all types of manual dispensing equipment currently available. Quick-setting from the molten state allowing units to be moved from their assembly location between two and five minutes after application. Can be used as a secondary seal in conjunction with a P.I.B.primary sealant.
Alkali metal alumino-silicate placed in the double lined perforations of the aluminium spacer bars in order to prevent the chemical reactions and evaporations taking place between the two glasses. Low water adsorption speed within first one hour and during application. Very high water adsorption capacity in volume unit. Particle size of the molecular sieve is between 1.5 to 2.0mm.
