New Search
Assembly and repair
(9)
Grab adhesives
(4)
Heating, Ventilation & Air Conditioning
(13)
Home decoration
(37)
Industrial Assembly
(5)
Industrial seamless floors
(10)
Insulating Glass
(4)
Labelling
(15)
Parquet
(13)
PVC welding
(4)
Rigid packaging
(30)
Sealants
(11)
Self-levelling compounds
(14)
Soft floor (carpet /PVC)
(21)
Substrate preparation/Primers
(15)
Tapes and Labels
(12)
Tiling
(10)
Wall adhesives
(9)
Waterproofing coatings
(9)
Wood working
(15)
Ardal
(14)
Bostik
(142)
Eponal
(14)
Laybond
(2)
Novaflex
(4)
Quelyd
(23)
Roxol
(10)
Sader
(14)
Tarbicol
(4)
Floors
(75)
Walls
(22)
Environmentally friendly
(48)
Exterior
(23)
Heat resistant
(6)
Ready-to-use
(103)
Suitable on wet substrate
(6)
Water resistant
(17)
Ceramic tiles
(37)
Paper/cardboard
(71)
PVC
(32)
Construction
(112)
Consumer
(25)
Industry
(95)
Improved cementitous tiling adhesive C2 T for interior/exterior walls and floors. Suitable for low porosity ceramic tiles (group B1a), up to 3600cm² (60×60), for new works and renovation, private basins and swimming pools. Can be used on Intermediate floor slabs, floor with underfloor heating system, anhydrite screed. Available in grey and white coulours.
Flexible joint wall and floor grout for interior and exterior use. Suitable for 2 to 20 mm wide joints. Suitable for grouting joints between marble, natural stone, terracotta, glass mosaics and vitrified tiles. Specially designed to resist to substrate deformations: façades, terraces, underfloor heating, wood flooring, commercial premises, etc. Water-repellent formulation with "pearl effect" technology that limits water and dirt penetration into joints.
Fine grout for wall and floor tiles, interior and exterior use. For grouting 1-6mm wide joints between marble, natural stone, terracotta, glass mosaics and vitrified tiles. Water-repellent formulation with "pearl effect" technology that limits water and dirt penetration into joints.
Wide joint grout for wall and floor tiles, interior and exterior use. Suitable for 2 to 20 mm wide joints. Suitable for grouting joints between marble, natural stone, terracotta, glass mosaics and vitrified tiles. Specially adapted to natural stones, terracotta and for premises subject to high pressure cleaning (up to 80 bars).
MSDS (anthracite colour) (33 Ko) MSDS (grey colour) (33 Ko) MSDS (grey-stainless steel colour) (32 Ko)
Two-part epoxy grouting compound and adhesive. For use on interior/exterior floors and walls. Suitable for joints from 2 to 15mm (ceramic tiles, mosaics, natural stone, marble, terracotta tiles). High chemical resistance and mechanical strength. Fixing and grouting mosaics in swimming pools on concrete and cement substrates. Can be used to fix tiles to specific substrates (metal, polyester).
Hot melt adhesive for edgebanding and soft forming applications. ARDAL HM 195 is a translucent unfilled adhesive suitable on all types of edges: wood, melamine paper, plastic materials (ABS, PVC, polyester, etc.), unprimed HPL.
Coating speed for straight edgebanding: from 30 to 60 m/min
Coating speed for soft forming: from 5 to 30 m/min
Heat resistance: 60-80°C
Suitable on allmost all types of edges: wood, melamine paper, plastic (ABS, PVC, polyester, etc.). Suitable for thick wood (up to 3cm) and difficult edges. Coating speed for straight edgebanding: from 30 to 80 m/min. Coating speed for soft forming: from 25 to 30 m/min. Heat resistance: 70-100°C.
Low application temperature. Especially designed for edgebanding application of primed PVC edges, which are not electrically conductive. Suitable on slow speed machines: from 5 to 25 m/min. Heat resistance: 60-70°C.
Very high temperature resistance: 100-130°C (ideal for kitchen furniture). Suitable for all types of edges. Suitable on slow speed machines for soft forming: from 5 to 30 m/min. Coating speed for straight edgebanding: from 5 to 80 m/min.
Filled hot melt adhesive for edgebanding application of polyester, melamine paper and wood veneer onto particle boards and plywood. Coating speed: 20-80 m/min. Good thermal stability and good heat resistance: 80-100°C.
