THERMOGRIP F50

Hot-melt adhesive for case / carton / folding box sealing applications.

Suitable for high-speed packaging lines. Fast setting time. FDA 175 105 & 175 300 approved. Well adapted for moisture resistant stringy cardboard (double or triple-fluted). Very good hot tack. Suitable for application by nozzle or wheel.

ADJUVANT FORCE 3

Additive to improve self-levelling compounds properties

It is suitable for modifying our smoothing compounds for moderate wear into hard wear compounds. 1 kg pouch is sufficient for 25 kg of compound. It changes the modulus of elasticity of smoothing underlayments and makes their use safer in difficult working conditions. Red-coloured to provide visual control of its mixing into the compound prior to application to heavy-duty locations.

MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)

AGOMASTIC DECOR AG

All-purpose solvent-based grab adhesive. For all types of substrates

All-purpose solvent-based grab adhesive. For all types of substrates. High filling capacity: fills gap on uneven substrates till 5 mm. Fast setting adhesive. Withstands temperatures ranging from - 20° to +80°C.

MSDS

AGOPLAC DI GEL

Solvent-borne contact adhesive for bonding HPL on various substrate

Heat resistant. Gel formulation: does not flow. Long open time

5. Woodworking adhesives (1284 Ko)

ARDAFIX PLUS

C1 TE tiling mortar (long open time and increased tack)

Cementitious tiling adhesive C1 TE suitable for interior walls and floors small and large-format ceramic tiles (formats up to 2,000 cm², i.e. 44×44 cm). C1- TE Classification (long open time and good non-slip properties). Suitable for private basins and swimming pools.

MSDS (grey colour) (33 Ko) MSDS (white colour) (33 Ko)

ARDAFIX T1

C1 T tiling mortar (increased tack, standard open time)

Cementitious tiling adhesive C1T for interior walls and floors. Suitable for small and large format ceramic tiles (formats up to 2,000 cm², i.e. 44x44 cm). Suitable for standard porosity tiles.

MSDS (grey colour) (33 Ko) MSDS (white colour) (33 Ko)

ARDAFLEX G

C2 G tiling mortar (improved quality, fluid)

Cementitious tiling adhesive C2G for interior/exterior floors (tile format up to 3600cm²). Allows application of low porosity tiles on new and old subfloors. Suitable for installing tiles on difficult subfloors: floors with underfloor heating system, old tiles, premises subject to heavy traffic and loads (U4P4-U4P4S classification). High yield on new and old subfloors without primer

MSDS (33 Ko)

ARDAFLEX PLUS

C2 TE tiling mortar (improved quality, increased tack and long open time)

Cementitious flexible tiling adhesive C2TE for interior/exterior walls and floors. For large-format tiles and natural stones (lime stone, marble, granite) of all porosity. Versatile: terraces, façades, heavy traffic, collective basins and swimming pools, wood substrates, etc.

MSDS (grey colour) (33 Ko) MSDS (white colour) (33 Ko)

ARDAFLEX T2

C2 T tiling mortar (improved quality, increase tack with standard open time)

Improved cementitous tiling adhesive C2 T for interior/exterior walls and floors. Suitable for low porosity ceramic tiles (group B1a), up to 3600cm² (60×60), for new works and renovation, private basins and swimming pools. Can be used on Intermediate floor slabs, floor with underfloor heating system, anhydrite screed. Available in grey and white coulours.

MSDS (grey colour) (33 Ko) MSDS (white colour) (33 Ko)

ARDAJOINT FLEX

Flexible tiling grout (2 to 20 mm), easy to clean

Flexible joint wall and floor grout for interior and exterior use. Suitable for 2 to 20 mm wide joints. Suitable for grouting joints between marble, natural stone, terracotta, glass mosaics and vitrified tiles. Specially designed to resist to substrate deformations: façades, terraces, underfloor heating, wood flooring, commercial premises, etc. Water-repellent formulation with "pearl effect" technology that limits water and dirt penetration into joints.

MSDS (grey colour) (33 Ko) MSDS (white colour) (33 Ko)