New Search > Roxol
Page :
10 products
Self-levelling compounds
(9)
Substrate preparation/Primers
(1)
Bostik
(1)
Roxol
Exterior
(1)
Ready-to-use
(1)
Roxol is a professional brand for levelling and smoothing applications.
Its range includes self-smoothing and self-levelling compounds for premises subject to light, moderate or heavy traffic, high performance compounds for heavy duty areas, fast-setting compounds for premises that can only be closed for short periods of time (malls, shops, etc.).
Used as a primer and a bonding agent for the preparation of absorbent substrates prior to the application of smoothing and levelling compounds and flooring adhesives. Also works as a pore sealer - preventing pin holing in subsequently applied underlayments; it also prolongs their flow life and workability.
Flexible levelling compound for smoothing and levelling of subfloors. It can be applied in layers between 3-10 mm thickness in one work step. Excellent mechanical properties. Self-levelling: little or no sanding required. Does not shrink, recommended on difficult surfaces.
Self-smoothing compound suitable for hard/heavy wear. It can be applied in layers between 1-30 mm thickness (3-30 mm for heavy-duty area) in one work step. Good mechanical properties. Rapid hydraulic setting.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Red-coloured to provide visual quality control. Suitable for smoothing and levelling of screeds, concrete floors and other hard, rigid bases, up to a maximum thickness of 15 mm in a single work step. Paintable. High resistance to puncture. Excellent bonding strength. Little or no sanding required.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
It can be applied in layers between 1-20 mm thickness in one work step. Thick layers and sloping finish possible by adding 0.4-0.9 mm sharp sand (i.e. in collective showers and kitchen). Quick hydraulic setting.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 50 mm in single work step. Can be used for smoothing walls up to 5 mm thickness. Can be used for local repairs at thickness greater than 30 mm, e.g. filling holes, depressions and cracks; repairing stairs and landings, building up sloping surfaces.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 5 mm in a single work step. Suitable for normal wear (plastic and textile coverings) in domestic/residential and light commercial locations. Does not shrink, very tolerant in renovation works.
Red-coloured to provide visual quality control. High resistance to indentation- Up to 10 mm in one work step. Reduced sanding.
Specially designed for renovation works in occupied locations. Dry for floor coverings after only 2-4 hours. Good mechanical and application qualities. Final finish in one step - no need to sand.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
Suitable for smoothing and levelling of subfloors up to a maximum thickness of 15 mm in a single work step. For hard wear in commercial and industrial locations where service is only interrupted for few hours (hypermarkets and stores, hospitals, factories and workshops, public buildings). After only 4 hours the smoothed surface is ready for laying floor coverings. Can be used as a wearing surface.
1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko) MSDS (31 Ko)
Page :