QUELYD RACCORD is a multi-purpose adhesive for hanging vinyls to vinyls and plastic wallcoverings over plastic wallcoverings.
Ideal for bonding overlapping seams, loose seams (even on non-absorbent substrates), tears, areas around corners and ceiling, braids and borders.
Physical:
- Adhesive type: water-based adhesive of acrylic resins
- Colour: pale cream
- Specific gravity: approx. 1.5
- pH in solution: approx. 8-9.5
- Non-flammable
- Working time: 30 minutes subject to ambient conditions, relative humidity and substrate porosity
- Open time: 0 to 10 minutes subject to ambient conditions, relative humidity and substrate porosity
- Full cure: after 24-48 hours subject to ambient conditions, relative humidity and substrate porosity
- Working temperature: between +10° and + 25°C
- Frost-sensitive
Consumption:
80 g for approx. 40 linear meters of seam
Safety:
IMPORTANT: before embarking on any work involving QUELYD RACCORD the separate Product Safety Data Sheet must be studied carefully by those carrying out the work.
Observe good hygiene in use. Keep out of reach of children and animals. Avoid contact with eyes and skin.
Shelf life:
Up to 24 months in the original unopened container, stored between +5 and +30°C. Frost-sensitive
PREPARATION
Preparation should be in accordance with building standards. Substrates (wallpapers and vinyls) must be sound, even, smooth, permanently dry and free from dust, grease or other contaminants.
APPLICATION
For very small repair apply small dots of adhesive to the back of the wallpaper and smooth immediately.
For large areas use a small brush and apply a thin layer of adhesive to the area to be overlapped.
Observe an appropriate open time to improve tack and bonding strength.
Apply the overlapping wallcovering. Smooth the seam areas for a short period of time with dry and clean cloth.
Immediately wipe off excess adhesive with a clean damp sponge.
REMARKS
- Tightly close all containers after use.
Cleaning
Tools can be easily cleaned with cold water whilst the adhesive is still wet.