Search filter

Applications: Home decoration; Parquet
Brands: Tarbicol
Destinations: ~~Floors~~ (2)
Specific characteristics: ~~Ready-to-use~~ (2)
Segments: ~~Construction~~ (2)

PRIMAIRE CIM

Bonding agent and pore sealer

Additional Downloads
MSDS
Definition
PrimerLiquid or paste applied onto a substrate to obtain optimum bonding. It helps regulate the porosity of the substrate (reduce absorption, therefore adhesive usage), increase adhesion to non porous surfaces, improves application properties of later on applied adhesive

Uses

PRIMAIRE CIM is an additive for improving malleability and cohesion of mortars.
Improves bond-strength of compounds, cement-based mortars, bonding slurries, renderings, grouts and tile adhesives.
Improves resistance to abrasion.
Does not alter the setting time of compounds.
PRIMAIRE CIM also works as a pore sealer – preventing pin holing in subsequently applied underlayments.
For interior use only.

Benefits

Easy to use: just add to water mortar volume prior to mixing with powder
Increases the bond-strength of cement mortars, levelling compounds, renderings, grouts and tile adhesives.
Improves mechanical properties of cement mortars, cementitious and plaster-based levelling compounds
Prevents cement-based products from cracking in hot weather
Improves the adhesion of the topcoats
Reduces tension
Improves the strength of repaired chipped edges made with cement mortars (e.g. stair nosings)

Properties

Physical:

Primer Type: Dispersion of plastified synthetic resins
Colour: white
Flashpoint: non-flammable
Specific gravity: 1.05
pH: 4-5
Working temperature: Preferably between +10°C and +25°C. Material and substrate temperature not below +10°C
Frost-sensitive

Consumption:

According to instructions

Safety:

IMPORTANT: before embarking on any work involving PRIMAIRE CIM the separate Product Safety Data Sheet must be studied carefully by those carrying out the work.

PREVENT skin and eye contact. Do not breathe vapours. Avoid spillages.

Shelf life:

Can be stored for 12 months when kept in the original, unopened container, protected from frost and stored at +5°C and +30°C. Frost-sensivtive.

Application

PREPARATION

Preparation should be in accordance with building standards. Subfloors must be sound, of adequate tensile and compressive strength; free from laitance, cracks and structural defects; clean and free from dust, grease, curing compounds, sealers or any other contaminants that would inhibit proper bond.

APPLICATION

When used as an additive for bonding slurries, renderings, screeds and tile grouts:

Dilute 2 volumes of PRIMAIRE CIM in one volume of clean water, then add the mixture to the required quantity of powder.

When used as a pore sealer on absorbent cementitious substrates:

Apply a layer (100-200 g/m² depending on the substrate porosity) of CIM additive (1:2 water-diluted), then allow to dry for about 1 hour prior to the normal application of smoothing compound.

When used as an additive for self-smoothing compounds and tile adhesives:

Mix 25 kg bag of smoothing compound with 1 kg of PRIMAIRE CIM diluted in 5.5 litres of water.

Use clean containers.

REMARKS

- Do not use pure, always dilute in water

- Tightly close all containers after use.

Cleaning
Clean fresh splashes and tools with warm water.

Packaging

Presentation	Bar code	Bostik code
jerry can - 20 litre(s)	3131368220797	501420