Search filter

Applications: Industrial seamless floors (2); Substrate preparation/Primers; Waterproofing coatings (1)
Brands: Ardal (2); Bostik (3); Eponal (4); Roxol (1); Sader (2)
Destinations: Floors
Specific characteristics: Exterior (1); Ready-to-use (6); Suitable on wet substrate (1); Water resistant (1)
Substrates: Ceramic tiles (5)
Segments: Construction

PARKETT ACRYLAT

Acrylic Gap Sealant and Filler for parquet

Additional Downloads
MSDS
3. Parquet Adhesives (948 Kb)
Definition
Waiting timeTime between adhesive application and material bonding. It is required to wait to allow the adhesive to have enough adhesion power (tack) to receive the floor covering.

Uses

PARKETT ACRYLAT is a one-part water-based acrylic sealant and filler suitable for filling gaps and hollow spots in unfinished or factory-prefinished parquet.

It is also can be used for sealing window and door frames.

Benefits

Quick drying
Easy to sand
Can be covered with all varnish types
Flexible joint: no shrinkage or cracking
Solvent- and silicone-free
Comes in 6 possible wood colours: light oak, dark oak, maple/pine/ash, light beech, dark beech and cherry

Properties

Physical:

Adhesive type: water-based acrylic adhesive
Specific gravity (NT T76.300): approx 1.6 g/cm3
Hardness, Shore A: approx. 60
Skin forming time: approx. 15 min at +23°C and relative humidity of 50%
Cure time: 3 to 5 hours depending on ambient conditions and joint thickness
Full cure: after 18 to 24 hours depending on ambient conditions and joint thickness
Application temperature : between +5°C and +40°C.
Temperature resistance: +20° to + 70°C

Consumption:

Depending on the depths and the width of the joint, i.e. about one cartridge for 3 m of 10 mm bead

Safety:

IMPORTANT: before embarking on any work involving PARKETT ACRYLAT the separate Product Safety Data Sheet must be studied carefully by those carrying out the work.

Observe good hygiene in use. Avoid skin and eye contact.

Shelf life:

Up to 12 months in the original unopened container stored between +10°C and +30°C. Frost-sensitive.

Application

Cut off the plastic top above the screw thread. Screw on the nozzle and apply adhesive in a continuous bead into crack or gap using a caulking gun.

In case of a very deep gap/joint place a backer rod into the seam bottom to reduce consumption. Smooth the filler with a wet finger.

A waiting time of 3 to 5 hours should be allowed before varnishing.

Cleaning

Water or damp cloth when still wet.

Packaging

Presentation	Bar code	Bostik code
cartridge - light oak colour - 300 ml	4008373111480	138340
cartridge - dark oak colour - 300 ml	4008373111503	138350
cartridge - maple/pine/ash colour - 300 ml	4008373111466	138360
cartridge - light beech colour - 300 ml	4008373111497	138370
cartridge - dark beech colour - 300 ml	4008373111473	138380
cartridge - cherry colour - 300 ml	4008373117468	138550