Search filter

Applications: Industrial seamless floors (6); Soft floor (carpet /PVC) (1); Substrate preparation/Primers (4); Waterproofing coatings (1)
Brands: Eponal
Destinations: Floors
Specific characteristics: Exterior (1); Suitable on wet substrate (1); Water resistant (1)
Substrates: Ceramic tiles (4)
Segments: ~~Construction~~ (9)

MASTIFIX N220

All-purpose neoprene grab adhesive. For all types of substrates.

Additional Downloads
MSDS (75 Kb)
Definitions
ImperviousCharacterisitc of a subfloor which porosity is very low. Adhesion on such substrates is usually more difficult and requires more attention and preparation.
Waiting timeTime between adhesive application and material bonding. It is required to wait to allow the adhesive to have enough adhesion power (tack) to receive the floor covering.

Uses

MASTIFIX N220 is a neoprene grab adhesive used for bonding: decorative panels, profiles, battens, skirting boards, stair nosings, tiles, parquet planks, insulating panels (except for polystyrene), ceiling roses and much more onto almost all types of substrates.

Not suitable for bonding expanded polystyrene.

For interior and exterior use.

Benefits

Nail free fixing all-purpose adhesive
High filling capacity: fills gap on uneven substrates till 5 mm
Excellent bond strength onto all types of substrates: concrete, steel, wood, plasterboards, brick, glass, synthetic materials (except for polystyrene and polyethylene)
Easy to use
Fast setting adhesive
Withstands temperatures ranging from – 20° to +80°C
Packaging in Russian, Ukrainian, Bulgarian and Romanian.

Properties

Physical:

Adhesive type: polychloroprene adhesive
Colour: white
Dry solids content: approx. 70%
Specific gravity: approx. 1.35
Waiting time: one-way bonding – approx. 10-15 minutes; two-way bonding - approx. 15-20 minutes
Setting time: immediate bonding of fixings
Full cure: approx. 24-48 hours
Working temperature: from -10° to +35°C, but preferably between +5° to +35°C

Consumption:

15 metres of 5mm diameter bead

Safety:

IMPORTANT: before embarking on any work involving MASTIFIX N220 the separate Product Safety Data Sheet must be studied carefully by those carrying out the work.

Observe good hygiene in use. Keep out of reach of children and animals. Avoid contact with eyes and skin.

Shelf life:

Up to 18 months in the original unopened cartridge, stored between +5 and +30°C.

Application

PREPARATION

Surfaces to be bonded must be clean, dry and free of grease, oil or dust. Any loose or flaking paint must be removed and lightly sanded before application.

APPLICATION

One-side application

For small and long pieces (skirting, profiles) apply on the surface a linear bead of adhesive from the cartridge using an extrusion gun.

For small panels apply by spots.

For larger pieces, apply to the surface the beads or spots of adhesive spaced 15cm apart.

Bonding should be done within 10 minutes after adhesive application.

Place the piece to be bonded into position and press firmly over entire surface to smooth the adhesive. Fixed piece can be repositioned within 4-5 minutes after bonding.

Two-side application

Bonding heavy panels or bonding onto impervious substrates (e.g. metal decking).

Follow the above-mentioned application method, but after pressing the piece into position, pull both surfaces apart. This method is used to transfer adhesive onto the substrate. Allow a waiting time of 5-10 minutes. Adjust the piece immediately into position and press firmly together. The bond is immediate.

Full cure for both application methods is of 24 to 48 hours.

REMARKS

- Work in a dust-free environment.

- Do not use on damp substrates (condensation effect)

Cleaning

Fresh and dry spillages can be cleaned with a acetone.

Packaging

Presentation	Bar code	Bostik code
cartridge - 310 ml	3549210021728	110290