New Search > Industry > Environmentally friendly > Ready-to-use
2 Pages :
16 products
Insulating Glass
(3)
Labelling
(5)
Rigid packaging
(8)
Environmentally friendly
Ready-to-use
Suitable on wet substrate
(2)
Paper/cardboard
(13)
Industry
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for low speed (< to 30 000 bottles/hour). Good flow characteristics.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for high speed (up to 80 000 bottles/hour). Good flow characteristics. Good resistance to water condensation.
Specifically formulated for use in the production of dual seal insulating glass units. Exhibits an extremely low moisture vapour transmission rate and excellent adhesion to glass, aluminium and galvanised steel spacer bar. Acts as a thermal break. Can also be used as a Spacer bar adhesive.
Single part butyl rubber based sealant. Compatible with all types of manual dispensing equipment currently available. Quick-setting from the molten state allowing units to be moved from their assembly location between two and five minutes after application. Can be used as a secondary seal in conjunction with a P.I.B.primary sealant.
Established market leading hot melt butyl edge sealant, specially developed for the edge sealing of factory produced insulating glass units by manual or robotic application. Sets quickly from its molten state, allowing untis to be moved from their assembly location within 5 minutes of application. Rapid unit production - smooth flow, fast gunning. Fully meets the requirement of EN 1279.
Long open time. Good tack. Standard application by double roller.
Good adhesion on difficult substrates (water ink or acrylic). Suitable for high and medium speed machines. Good initial tack at medium or high speed. Application by wheel.
Good initial tack. Fast setting. Long open time. Suitable for Valco contact, Nordson jetting systems and application by wheel. Good adhesion on difficult substrates such as non absorbent cardboard.
Water-based vinylic adhesive suitable for labelling on aluminium and for bonding paper/cardboard
Seam adhesive for horizontal labelling of metal cans with standard paper labels. Suitable for Duvivier and Burt machines. Good initial tack
2 Pages :