Best-sellers

• 

  NM 105

  High-performance levelling and smoothing screed (1-5 mm)

  Self-levelling compound for domestic and light commercial premises. For interior use only. Very good smoothing capability, easy to prepare, very smooth finish, reduced sanding. Does not shrink. Suitable for underfloor heating.

  1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko) MSDS (59 Ko)

• 

  NM 110

  High-performance levelling and smoothing screed (1 to 10-15 mm)

  Self-levelling compound for commercial premises with high traffic. Easy to prepare and ready-to-mix. Reduced sanding. High resistance to identation. Pumpable. Suitable for underfloor heating.

  1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko) MSDS (60 Ko)

• 

  ROXOL FIBRÉ

  Fibre-reinforced self-levelling compound. Especially suitable for repairing old surfaces

  Flexible levelling compound for smoothing and levelling of subfloors. It can be applied in layers between 3-10 mm thickness in one work step. Excellent mechanical properties. Self-levelling: little or no sanding required. Does not shrink, recommended on difficult surfaces.

  MSDS 1. Subfloor Preparation Guide (55 Ko)

• 

  ROXOL FLEX

  Fibre-reinforced self-levelling compound. For heavy-duty and thickness up to 30 mm

  Self-smoothing compound suitable for hard/heavy wear. It can be applied in layers between 1-30 mm thickness (3-30 mm for heavy-duty area) in one work step. Good mechanical properties. Rapid hydraulic setting.

  MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)

• 

  ROXOL HR4

  Self-levelling compound for heavy duty areas and locations with high point loading

  Red-coloured to provide visual quality control. Suitable for smoothing and levelling of screeds, concrete floors and other hard, rigid bases, up to a maximum thickness of 15 mm in a single work step. Paintable. High resistance to puncture. Excellent bonding strength. Little or no sanding required.

  MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)

• 

  ROXOL MINI CHAPE

  Self-levelling compound for heavy duty areas and for normal wear

  It can be applied in layers between 1-20 mm thickness in one work step. Thick layers and sloping finish possible by adding 0.4-0.9 mm sharp sand (i.e. in collective showers and kitchen). Quick hydraulic setting.

  MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)

• 

  ROXOL RENO QUICK

  Fast-setting rapid repair mortar for smoothing floors and walls.

  For smoothing and levelling of subfloors up to a maximum thickness of 50 mm in single work step. Can be used for smoothing walls up to 5 mm thickness. Can be used for local repairs at thickness greater than 30 mm, e.g. filling holes, depressions and cracks; repairing stairs and landings, building up sloping surfaces.

  MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)

• 

  ROXOL S

  Standard self-levelling compound for normal wear

  For smoothing and levelling of subfloors up to a maximum thickness of 5 mm in a single work step. Suitable for normal wear (plastic and textile coverings) in domestic/residential and light commercial locations. Does not shrink, very tolerant in renovation works.

  MSDS 1. Subfloor Preparation Guide (55 Ko)

• 

  ROXOL TRAFIC 3

  Levelling compound suitable for heavy-duty areas and location with high point loading.

  Red-coloured to provide visual quality control. High resistance to indentation- Up to 10 mm in one work step. Reduced sanding.

  MSDS 1. Subfloor Preparation Guide (55 Ko)

• 

  ROXOL TRAVAUX RAPIDES

  Fast-set self-levelling compound for normal wear in commercial locations and for heavy-duty areas

  Specially designed for renovation works in occupied locations. Dry for floor coverings after only 2-4 hours. Good mechanical and application qualities. Final finish in one step - no need to sand.

  MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)