New Search > Environmentally friendly > Industry

Heating, Ventilation & Air Conditioning
(1)
Insulating Glass
(3)
Labelling
(5)
Rigid packaging
(8)
Sealants
(1)
Tapes and Labels
(12)
Wood working
(2)
Environmentally friendly
Heat resistant
(1)
Ready-to-use
(16)
Suitable on wet substrate
(2)
Water resistant
(4)
Paper/cardboard
(16)
Industry
Suitable for most common face stock materials like vellum, cast-coated glossy paper, thermal paper or other design for general purpose permanent labels and tapes. Suitable for general purpose permanent applications on paper and polyolefin. Very high grab product. Excellent converting properties and die-cut ability.
Ideal for bonding thin straight plastic and paper edges on particle boards. Good initial cohesion. Very good thermal stability. No stringing. Good heat resistance. Suitable on speed machines from 20 to 80 m/min.
For wrapping veneers and thick paper foils to profiles made from solid wood, particle boards and MDF. Suitable for high and low speed lines. Very good heat-resistance: 90-100°C.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for low speed (< to 30 000 bottles/hour). Good flow characteristics.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for high speed (up to 80 000 bottles/hour). Good flow characteristics. Good resistance to water condensation.
Specifically formulated for use in the production of dual seal insulating glass units. Exhibits an extremely low moisture vapour transmission rate and excellent adhesion to glass, aluminium and galvanised steel spacer bar. Acts as a thermal break. Can also be used as a Spacer bar adhesive.
Single part butyl rubber based sealant. Compatible with all types of manual dispensing equipment currently available. Quick-setting from the molten state allowing units to be moved from their assembly location between two and five minutes after application. Can be used as a secondary seal in conjunction with a P.I.B.primary sealant.
Established market leading hot melt butyl edge sealant, specially developed for the edge sealing of factory produced insulating glass units by manual or robotic application. Sets quickly from its molten state, allowing untis to be moved from their assembly location within 5 minutes of application. Rapid unit production - smooth flow, fast gunning. Fully meets the requirement of EN 1279.
Long open time. Good tack. Standard application by double roller.
Good adhesion on difficult substrates (water ink or acrylic). Suitable for high and medium speed machines. Good initial tack at medium or high speed. Application by wheel.