New Search > Environmentally friendly

Assembly and repair
(3)
Grab adhesives
(1)
Heating, Ventilation & Air Conditioning
(1)
Home decoration
(11)
Insulating Glass
(3)
Labelling
(5)
Parquet
(1)
Rigid packaging
(8)
Sealants
(2)
Tapes and Labels
(12)
Wall adhesives
(8)
Wood working
(2)
Bostik
(35)
Quelyd
(12)
Floors
(1)
Walls
(9)
Environmentally friendly
Exterior
(3)
Heat resistant
(2)
Ready-to-use
(24)
Suitable on wet substrate
(3)
Water resistant
(5)
Paper/cardboard
(25)
PVC
(2)
Construction
(13)
Consumer
(10)
Industry
(32)
Suitable for hanging wallcoverings with non-woven fabric backing; vinyls with non-woven fabric backing; paintable wallcoverings with non-woven fabric backing. Paste the wall adhesive easily applied with a roller or brush. Rapid hanging: no booking time. Resistance to micro-organisms: very good, mould resistant formula. New packaging in 4 languages: Romanian, Bulgarian, Ukranian, Russian.
Suitable for most common face stock materials like vellum, cast-coated glossy paper, thermal paper or other design for general purpose permanent labels and tapes. Suitable for general purpose permanent applications on paper and polyolefin. Very high grab product. Excellent converting properties and die-cut ability.
1-Component MS polymer-based parquet adhesive suitable for securing all types of parquet floorings on absorbent and impervious substrates. Moisture-resistant (e.g. bonding teak in wet areas). User-and environment-friendly (classified EC1 Very Low Emission). Permanently elastic at temperatures ranging from - 40° to +120°C. Restores its initial elasticity after compression or elongation.
Ideal for bonding thin straight plastic and paper edges on particle boards. Good initial cohesion. Very good thermal stability. No stringing. Good heat resistance. Suitable on speed machines from 20 to 80 m/min.
For wrapping veneers and thick paper foils to profiles made from solid wood, particle boards and MDF. Suitable for high and low speed lines. Very good heat-resistance: 90-100°C.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for low speed (< to 30 000 bottles/hour). Good flow characteristics.
It is used to apply labels on cold, wet, dry and hot, commercially available glass bottles. Suitable for high speed (up to 80 000 bottles/hour). Good flow characteristics. Good resistance to water condensation.
BLU TACK is the original re-usable adhesive that provides an ideal alternative to drawing pins and sticky tapes with hundred of uses around home, office and school environment. Suitable for: holding up posters, cards, paintings; holding down telephones, photographs in albums, calculator, wires; cleaning fluffs from fabric and dirt from keyboards.
High bond-strength for hanging all borders over any wallcovering, wallpaper and substrate. Easy Slide for quick border adjustability. Economic coverage. Extremely high tack: easy bonding and border positioning. Contains antifungal and biocide additives to prevent mould growth. Ideal for hanging in areas subject to condensation or wet areas (kitchen, bathroom). Packaging available in 4 languages: Romanian, Bulgarian, Ukranian, Russian.
Specifically formulated for use in the production of dual seal insulating glass units. Exhibits an extremely low moisture vapour transmission rate and excellent adhesion to glass, aluminium and galvanised steel spacer bar. Acts as a thermal break. Can also be used as a Spacer bar adhesive.