New Search > Construction
Assembly and repair
(1)
Grab adhesives
(5)
Home decoration
(34)
Industrial seamless floors
(9)
Parquet
(12)
PVC welding
(2)
Sealants
(5)
Self-levelling compounds
(13)
Soft floor (carpet /PVC)
(17)
Substrate preparation/Primers
(10)
Tiling
(10)
Wall adhesives
(9)
Waterproofing coatings
(9)
Wood working
(4)
Ardal
(14)
Bostik
(38)
Eponal
(14)
Laybond
(1)
Novaflex
(3)
Quelyd
(13)
Roxol
(10)
Sader
(10)
Tarbicol
(4)
Floors
(69)
Walls
(21)
Environmentally friendly
(13)
Exterior
(18)
Heat resistant
(3)
Ready-to-use
(50)
Suitable on wet substrate
(4)
Water resistant
(10)
Ceramic tiles
(31)
Paper/cardboard
(10)
PVC
(22)
Construction
Consumer
(13)
Industry
(2)
Multi-purpose adhesive suitable for most PVC floorcoverings and textiles. High grab and initial tack. Easy to use. Resistant to castor wheels. Suitable on heated floors
Multi-purpose fast-setting acrylic adhesive for PVC/vinyl floor coverings, textile floor coverings, thin rubber floor coverings (maximum thickness of 2.5mm), natural linoleum. Also suitable for thick wallcoverings (up to 2 kg/m²) and thin homogeneous PVC for showers. Bonding PVC onto PVC.
Suitable for all types of PVC/vinyl floor coverings, polyolefin, rubber floor coverings, textiles, natural floor coverings (Coir, sisal and sea grass), natural linoleum. Suitable for technical floors: gym, PVC floor and wall coverings for showers, bonding PVC onto PVC. Dry film can be reactivated by a heat gun. Long working time.
1-Component MS polymer-based parquet adhesive suitable for securing all types of parquet floorings on absorbent and impervious substrates. Moisture-resistant (e.g. bonding teak in wet areas). User-and environment-friendly (classified EC1 Very Low Emission). Permanently elastic at temperatures ranging from - 40° to +120°C. Restores its initial elasticity after compression or elongation.
One-component polyurethane adhesive for direct bonding of unfinished or factory-finished parquet flooring (all wood types and all thickness). Multi-purpose adhesive for absorbent or impervious substrates Excellent moisture- and water-resistance (can be used in wet areas: bathrooms, kitchens). Solvent- and water-free. Long working time.
Two-component polyurethane adhesive for all types of parquet. Long working time: 80 minutes. Enhanced properties. Good moisture-resistance. High-temperature resistace. Easy notched-trowel application. Water-free, thus no damaging swelling effect on wood. For indoor use.
It is suitable for modifying our smoothing compounds for moderate wear into hard wear compounds. 1 kg pouch is sufficient for 25 kg of compound. It changes the modulus of elasticity of smoothing underlayments and makes their use safer in difficult working conditions. Red-coloured to provide visual control of its mixing into the compound prior to application to heavy-duty locations.
MSDS 1. Subfloor Preparation Guide (55 Ko) 2. Primers and self-levelling compounds (1642 Ko)
All-purpose solvent-based grab adhesive. For all types of substrates. High filling capacity: fills gap on uneven substrates till 5 mm. Fast setting adhesive. Withstands temperatures ranging from - 20° to +80°C.
Heat resistant. Gel formulation: does not flow. Long open time
Cementitious tiling adhesive C1 TE suitable for interior walls and floors small and large-format ceramic tiles (formats up to 2,000 cm², i.e. 44×44 cm). C1- TE Classification (long open time and good non-slip properties). Suitable for private basins and swimming pools.
