New Search > Construction > Self-levelling compounds
2 Pages :
13 products
Heavy work
(2)
Self-levelling compounds
Substrate preparation
(2)
Bostik
(4)
Roxol
(9)
Floors
(11)
Exterior
(2)
Ceramic tiles
(11)
Construction
Consumer
(2)
Self-levelling compound for domestic and light commercial premises. For interior use only. Very good smoothing capability, easy to prepare, very smooth finish, reduced sanding. Does not shrink. Suitable for underfloor heating.
Primers and self-levelling compounds (1642 Ko) Subfloor Preparation Guide (55 Ko)
It is suitable for modifying our smoothing compounds for moderate wear into hard wear compounds. 1 kg pouch is sufficient for 25 kg of compound. It changes the modulus of elasticity of smoothing underlayments and makes their use safer in difficult working conditions. Red-coloured to provide visual control of its mixing into the compound prior to application to heavy-duty locations.
MSDS Primers and self-levelling compounds (1642 Ko) Subfloor Preparation Guide (55 Ko)
Suitable for heavy-duty areas and for normal wear in private locations. It can be applied in layers between 3-80 mm thickness in one work step. Suitable for heavy-duty areas from 3 mm thickness.Exceptional application and mechanical properties. Pumpable.
Self-levelling compound for commercial premises with high traffic. Easy to prepare and ready-to-mix. Reduced sanding. High resistance to identation. Pumpable. Suitable for underfloor heating.
Primers and self-levelling compounds (1642 Ko) Subfloor Preparation Guide (55 Ko)
Flexible levelling compound for smoothing and levelling of subfloors. It can be applied in layers between 3-10 mm thickness in one work step. Excellent mechanical properties. Self-levelling: little or no sanding required. Does not shrink, recommended on difficult surfaces.
Self-smoothing compound suitable for hard/heavy wear. It can be applied in layers between 1-30 mm thickness (3-30 mm for heavy-duty area) in one work step. Good mechanical properties. Rapid hydraulic setting.
MSDS Primers and self-levelling compounds (1642 Ko) Subfloor Preparation Guide (55 Ko)
Red-coloured to provide visual quality control. Suitable for smoothing and levelling of screeds, concrete floors and other hard, rigid bases, up to a maximum thickness of 15 mm in a single work step. Paintable. High resistance to puncture. Excellent bonding strength. Little or no sanding required.
MSDS Primers and self-levelling compounds (1642 Ko) Subfloor Preparation Guide (55 Ko)
It can be applied in layers between 1-20 mm thickness in one work step. Thick layers and sloping finish possible by adding 0.4-0.9 mm sharp sand (i.e. in collective showers and kitchen). Quick hydraulic setting.
MSDS Primers and self-levelling compounds (1642 Ko) Subfloor Preparation Guide (55 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 50 mm in single work step. Can be used for smoothing walls up to 5 mm thickness. Can be used for local repairs at thickness greater than 30 mm, e.g. filling holes, depressions and cracks; repairing stairs and landings, building up sloping surfaces.
MSDS Primers and self-levelling compounds (1642 Ko) Subfloor Preparation Guide (55 Ko)
For smoothing and levelling of subfloors up to a maximum thickness of 5 mm in a single work step. Suitable for normal wear (plastic and textile coverings) in domestic/residential and light commercial locations. Does not shrink, very tolerant in renovation works.
2 Pages :