New Search > Construction > Floors > Ready-to-use
Home decoration
(20)
Parquet
(11)
Soft floor (carpet /PVC)
(15)
Substrate preparation/Primers
(5)
Waterproofing coatings
(1)
Wood working
(1)
Ardal
(3)
Bostik
(16)
Laybond
(1)
Quelyd
(1)
Roxol
(1)
Sader
(10)
Tarbicol
(4)
Floors
Walls
(1)
Environmentally friendly
(1)
Exterior
(3)
Ready-to-use
Suitable on wet substrate
(1)
Water resistant
(1)
Ceramic tiles
(2)
PVC
(13)
Construction
Consumer
(3)
Suitable for laminate and parquet floors. It is used for glueless assembly of laminate and parquet floors. The flooring assembled with CLIC PROTECT can be easily disassembled later on. Elastic sealant. Colourless. Non staining. Quick drying. Long lasting protection of the joint without swelling.
Vinyl Adhesive for unfinished wood flooring and cork underlay, suitable for up to 15 mm unfinished wood flooring. Rapid initial tack. User-friendly: non-toxic. Leaves no stains. No open time required
Solvent-based synthetic resin adhesive for unfinished or varnished parquet flooring. Quick setting. High initial tack. Water-free dispersion adhesive. High shear resistance. Suitable for underfloor heating.
Fast-setting acrylic adhesive for PVC and textile floor coverings. Resistant to castor wheels. Long open time. Low solvent content. Suitable on heated floors.
Multi-purpose adhesive suitable for most PVC floorcoverings and textiles. High grab and initial tack. Easy to use. Resistant to castor wheels. Suitable on heated floors
Multi-purpose fast-setting acrylic adhesive for PVC/vinyl floor coverings, textile floor coverings, thin rubber floor coverings (maximum thickness of 2.5mm), natural linoleum. Also suitable for thick wallcoverings (up to 2 kg/m²) and thin homogeneous PVC for showers. Bonding PVC onto PVC.
Suitable for all types of PVC/vinyl floor coverings, polyolefin, rubber floor coverings, textiles, natural floor coverings (Coir, sisal and sea grass), natural linoleum. Suitable for technical floors: gym, PVC floor and wall coverings for showers, bonding PVC onto PVC. Dry film can be reactivated by a heat gun. Long working time.
1-Component MS polymer-based parquet adhesive suitable for securing all types of parquet floorings on absorbent and impervious substrates. Moisture-resistant (e.g. bonding teak in wet areas). User-and environment-friendly (classified EC1 Very Low Emission). Permanently elastic at temperatures ranging from - 40° to +120°C. Restores its initial elasticity after compression or elongation.
One-component polyurethane adhesive for direct bonding of unfinished or factory-finished parquet flooring (all wood types and all thickness). Multi-purpose adhesive for absorbent or impervious substrates Excellent moisture- and water-resistance (can be used in wet areas: bathrooms, kitchens). Solvent- and water-free. Long working time.
High performance primer & adhesion promoter for absorbent and non absorbent substrates. Increases adhesion between self-levelling compounds, tiling adhesives and most substrates. Quick-drying: approx. 30 min. depending on substrate. For use on interior walls/floors and exterior floors.
