Search filter

Applications: Industrial seamless floors (6); Soft floor (carpet /PVC) (1); Substrate preparation/Primers (4); Waterproofing coatings (5)
Brands: Eponal
Destinations: Floors (9)
Specific characteristics: Exterior (2); Suitable on wet substrate (2); Water resistant (5)
Substrates: Ceramic tiles (4); PVC (1)
Segments: ~~Construction~~ (14)

CLIC PROTECT

Sealant to ensure water protection of parquet floors

Additional Downloads
3. Parquet Adhesives (948 Kb)
MSDS (39 Kb)
Definitions
TackAdhesive power to maintain together 2 materials. Tacky surface means sticky surface.
Waiting timeTime between adhesive application and material bonding. It is required to wait to allow the adhesive to have enough adhesion power (tack) to receive the floor covering.

Uses

CLIC PROTECT is used for sealing joints of laminate and parquets floors, thus protecting it from moisture during floor cleaning (water or other method of cleaning recommended by the laminate manufacturers).
It is used for glueless assembly of laminate and parquet floors.
The flooring assembled with CLIC PROTECT can be easily disassembled later on.

Benefits

Elastic sealant
Colourless
Non staining
Quick drying
Suitable for glueless flooring assembly
Long lasting protection of the joint without swelling
Makes possible the use of some types of laminate floors in kitchen or bathroom (see manufacturer’s recommendations)
New packaging: 4 languages available - Bulgarian, Romanian, Russian and Ukranian

Properties

Physical:

Colour: transparent
Drying time: 15-30 minutes
Set to traffic: after 24 hours

Consumption:

15-20 linear metres = 10 m²

Safety:

IMPORTANT: before starting any work involving CLIC PROTECT, the separate Product Safety Data Sheet must be studied carefully by those carrying out the work.

Observe good hygiene in use. Avoid skin and eye contact.

Shelf life:

Up to 18 months in the original unopened container stored between +10°C and +30°C.

Application

PREPARATION

Preparation should be in accordance with building standards to lay parquet or laminate floor, ie subfloor must be sound, even, smooth, permanently dry and free from old adhesive residues, dust, grease or other contaminants.

APPLICATION

Allow a gap for expansion joint along the perimeter of the floor.

A gap of 5 to 8 mm should be done between the wood flooring and walls. Gap dimensions: 0.15% of the largest dimensions of the area to be covered with flooring. These expansion joints will be later covered by skirting boards.

Clean tongues and grooves from dust. Before assembly apply the sealant generously to the tongue edges along their width and length. Assembly the boards immediately so that the excess of the sealant appears on the top of the board.

Allow the sealant to dry for 15-30 minutes. Remove the surplus of the sealant using a plastic spatula. Carry out necessary test to make sure the spatula will not leave traces on the top of the board.

Reducing sound transmission

Apply SUBO EC 20 Fixer with a roller (consumption: 100 g/m²) onto the required underlayment. Allow an appropriate waiting time (approx. 46 to 60 minutes). The upper side of the underlay becomes tacky and creates a solid bond between underlayment and laminate boards. The laminate boards can be later disassembled.

REMARKS

Always follow the manufacturer’s installation instructions.

Packaging

Presentation	Bar code	Bostik code
tube + box - 125 ml	3549210024071	020181