Search filter

Applications: Home decoration (13); Soft floor (carpet /PVC)
Brands: Bostik (7); Eponal (1); Laybond (2); Quelyd (1); Sader (9)
Destinations: Floors (18)
Specific characteristics: Exterior (1); Heat resistant (1); Ready-to-use (17); Water resistant (1)
Substrates: PVC (13)
Segments: Construction (17); Consumer (1)

ARDAL T.8060

Hot-melt adhesive for profile wrapping. Also suitable for edgebanding, soft forming applications

Additional Downloads
MSDS
Definitions
Hot MeltAdhesive which is applied at hot temperatures and sets up while cooling
Open timeTime between the moment the adhesive was applied and the moment it has no more tack (end of possible laying the covering)

Uses

ARDAL T.8060 is a translucent unfilled hot-melt adhesive for profile wrapping. Also suitable for edgebanding and soft forming applications. Exhibits very good results for edges made from polyester and melamine paper with thickness of 1-3 mm.

Benefits

Suitable on slow speed machine (20-25 m/min)
No separation in tank when molten
Low viscosity
Very high cohesion
Fast melting properties
Good wetting ability
High mileage
Long open time
Good heat resistance: 60-70°C

Properties

Physical:

- Application temperature: 160–180°C
- Aspect: prills
- Colour: natural translucent
- Viscosite Thermosel at 180°C: approx. 7 000 mPa.s
- Softening point, R&B: approx. 88°C
- Slot nozzle application.

Viscosity curve

Consumption:

Coating weight (depending on panel quality): 40-100 g/m².

Shelf life:

2 years in original unopened packaging, stored at ambient temperature. Keep away from humidity.

Application

The panels and the edges should be kept at ambient temperature (which should not be below +15°C); wood moisture content should not exceed 10% in order to achieve good bonding results.

Packaging

Presentation	Bar code	Bostik code
bag - 25 kg		062060