Search filter

Applications: Assembly and repair (5); Grab adhesives (5); Heating, Ventilation & Air Conditioning (13); Home decoration (35); Industrial Assembly (5); Industrial seamless floors (10); Insulating Glass (4); Labelling (15); Parquet (12); PVC welding (4); Rigid packaging (30); Sealants (7); Self-levelling compounds (14); Soft floor (carpet /PVC) (20); Substrate preparation/Primers (13); Tapes and Labels (12); Tiling (10); Wall adhesives (9); Waterproofing coatings (9); Wood working (15)
Brands: Ardal (14); Bostik (137); Eponal (14); Laybond (2); Novaflex (4); Quelyd (17); Roxol (10); Sader (13); Tarbicol (4)
Destinations: Floors (72); Walls (21)
Specific characteristics: Environmentally friendly (47); Exterior (21); Heat resistant (7); Ready-to-use (91); Suitable on wet substrate (7); Water resistant (18)
Substrates: Ceramic tiles (31); Paper/cardboard (66); PVC (25)
Segments: Construction (105); Consumer (17); Industry (95)

New Search

Print version | Download TDS

IDENDEN 40-113

HIGH VELOCITY SOLVENTED DUCT SEALANT

Uses

Idenden High Velocity Solvented Duct Sealant 40-113 is a quick-setting, solvented synthetic rubber based product, formulated for sealing longitudinal and flange joints in high velocity air conditioning and ventilation systems.
Idenden High Velocity Solvented Duct Sealant 40-113 provides a tough, resilient air-tight seal which prevents loss of internal pressure from the duct. It is both waterproof and flame retardant and has excellent specific adhesion to metal services.
Idenden High Velocity Solvented Duct Sealant 40-113 conforms to HVAC Specification DW142 / DW144 and is fully tested in accordance with BS476 Part 6 and Part 7.

Benefits

Quick setting and easily applied
Flame resistant and waterproof when dry
Conforms to DW142 / DW144 Class 0 compliant
Wide service temperature range
Suitable for sealing longitudinal and flange joints

Properties

Physical:

Colour: Grey
Form: Gunnable paste
Specific gravity (density): 1.3 g/cm³
Composition: Synthetic rubber, resin, fillers and solvents
Solids content: 50% by volume

Typical Performance Data (approx.)

Drying time	Touch: 5 minutes (approx.) Through: 24 - 72 hours (dependent on bead size and drying conditions) Bond strength will continue to increase for about 7 days. Do not test duct for pressure tightness for at least 48 hours.
Service temperature	-30ºC to +90ºC
Application temperature	Above +5ºC
Reaction to fire	Wet: Flammable (flash point less than -18ºC) Dry: When used for its intended purpose does not detract from the surface spread of flame characteristics of the duct work. Independently tested to BS 476 Part 6 – Pass Part 7 – Class 1 Building regulations – Class 0

Consumption:

50 linear metres of 3mm diameter bead per C30 cartridge

Safety:

Before embarking on any work involving Idenden High Velocity Solvented Duct Sealant 40-113, the separate Safety Data Sheet should be carefully studied by those carrying out the work.

Shelf life:

At least 12 months from date of manufacture when stored unopened in a cool, dry place within the temperature range +5ºC to +25ºC and out of direct sunlight.

Application

1. Surfaces should be clean, dry and free from dust, oil, grease and any loose materials.

2. Cut nozzle of cartridge to give required width of bead and pierce inner foil at base of nozzle using a nail.

3. Insert cartridge into a skeleton gun and squeeze the trigger until the sealant appears.

4. Extrude a continuous bead of sealant along the seam or slip joint.

5. Position and fit sections of duct together and tighten, before the sealant dries.

6. Clean application equipment and remove excess uncured sealant with white spirit and cured sealant by abrasion.

Packaging

Presentation	Bar code	Bostik code
C30 cartridge -		xxxxxx