Home > Index
Adhesive suitable for indoor usage in frequent contact with condensation water or during a short period of time or exposed long term with high relative humidity. Also suitable for oudoor protect from rain
Eastern Europe,Middle East, Africa area
Adhesive which is applied at hot temperatures and sets up while cooling
Characterisitc of a subfloor which porosity is very low. Adhesion on such substrates is usually more difficult and requires more attention and preparation.
Variation of wood dimension when its moisture content varies by 1%
Special type of wall covering which backing is very dimensionally stable thus allows an application directly onto the wall, much easier than the traditional application (apply the adhesive on the back of the wallpaper ; fold the strip pasted side to pasted side and wait for required soaking time).
Time between the moment the adhesive was applied and the moment it has no more tack (end of possible laying the covering)
Polyurethane This is a chemical function obtained through reaction of an isocyanate with a polyol
Liquid or paste applied onto a substrate to obtain optimum bonding. It helps regulate the porosity of the substrate (reduce absorption, therefore adhesive usage), increase adhesion to non porous surfaces, improves application properties of later on applied adhesive
This range covers various applications related to packaging materials, in particular case sealing (= carton closing), folding box sealing (eg : cereal packs), tray forming (= erecting tray) + many speficif applications (eg straw on bricks...). The product choice will depend upon application conditons (product temperature, line speed, line open time...)
Adhesive power to maintain together 2 materials. Tacky surface means sticky surface.
Time between adhesive application and material bonding. It is required to wait to allow the adhesive to have enough adhesion power (tack) to receive the floor covering.
Time between end of waiting time and moment when the application is no longer possible